The GageWay SM is an easy-to-use interface designed to connect a single Mitutoyo digital gage (calipers, micrometers, digital indicators, etc.) to a USB port. The GageWay SM interfaces also support any gage that provides a standard Mitutoyo output (CDI, Federal Maxum, etc.). When using the USB version of the GageWay SM, the USB connection looks like a standard RS-232 serial port to your PC application. Features include... No baud rate or communication parameters required. The GageWay SM is pre-configured to operate at 9600-N-8-1. (USB driver installation may be required for USB version. Required Windows 2000 or later). Standard length is 72 inches. Supports Mitutoyo gages and any gage that provides a standard Mitutoyo output. Standard Mitutoyo cables can be used without modification. Plugs directly into a standard USB port. Powered by the USB port. No external AC adapter is required. Data output format set to gage measurement followed by a carriage return. No leading spaces are sent with the reading. Initiate single and continuous gage readings with the read button on the gage, an optional foot switch or hand switch, or a simple computer command. The optional foot or hand switch plugs into a connector on the side of the GageWay SM. LED flashes when a gage reading has been obtained. Requires Mitutoyo gage & Mitutoyo SPC Cable
