The GageWay SM is an easy-to-use interface designed to connect a single Mitutoyo digital gage (calipers, micrometers, digital indicators, etc.) to a USB port. The GageWay SM interfaces also support any gage that provides a standard Mitutoyo output (CDI, Federal Maxum, etc.). When using the USB version of the GageWay SM, the USB connection looks like a standard RS-232 serial port to your PC application.

Features include...

• No baud rate or communication parameters required. The GageWay SM is pre-configured to operate at 9600-N-8-1. (USB driver installation may be required for USB version. Required Windows 2000 or later).
• Standard length is 72 inches.
• Supports Mitutoyo gages and any gage that provides a standard Mitutoyo output.
• Standard Mitutoyo cables can be used without modification.
• Plugs directly into a standard USB port.
• Powered by the USB port. No external AC adapter is required.
• Data output format set to gage measurement followed by a carriage return. No leading spaces are sent with the reading.
• Initiate single and continuous gage readings with the read button on the gage, an optional foot switch or hand switch, or a simple computer command. The optional foot or hand switch plugs into a connector on the side of the GageWay SM.
• LED flashes when a gage reading has been obtained.

Requires Mitutoyo gage & Mitutoyo SPC Cable